DIY Styrofoam Headstones

DIY Styrofoam Headstones | Spooktacular

This post contains paid affiliate links, please read our Advertising Disclosure Statement.

DIY Styrofoam Headstones

About 15 years ago I decided I wanted to add a graveyard to my Halloween display. However, money was extremely tight and we couldn't afford to buy any foam headstones.... Where my husband was working at the time, he had access to Styrofoam scraps which gave me the idea to try and make my own! So I asked him if he would be allowed to bring home some of the scrapped Styrofoam? Thankfully he was able to get me quite a bit of Styrofoam scraps! The rest of the materials I used we already had laying around our garage and shed so, in the end, I made 15 headstones and spent zero money!

To this day we still have all 15 of those headstones and I'm ready to add to our collection. So, I'm going to share with you how I made mine all those years ago. Unfortunately, this time they will not be completely free because I do have to buy the Styrofoam and the green camo paint. But they will still be much cheaper and more original than the store bought ones!!

You'll Need:
Styrofoam (Your Local Home Improvement Store)
Serrated knife
Ruler
Marker
Exacto knife
Gorilla Glue
Spray Bottle with water to activate the Gorilla Glue
Medium gauge wire fencing or tomato cage (I've used both)
Light Gray primer
Dark Gray primer
Green Camo Paint
Black craft paint

Optional:
Brown and green craft paint
Moss

First, we're going to need to decide on the size and shape of our headstone. Either by freehanding a design from your imagination or you can google headstone shapes to get some ideas. 

You can use your maker to draw out your headstone onto your sheet of Styrofoam.

Then with the serrated knife, carefully cut it out. 

Now, what's your headstone going to say? We had a lot of fun coming up with phases and saying for our headstones! You can also google funny headstone sayings for some great ideas as well. After you've decided what your headstone is going to say and how you want it to look, draw it out on your headstone. 

Then using your Exacto knife carve out your design and writing.

On some of my headstones, I added bases using the extra Styrofoam I had left after cutting out all my shapes. 

I cut the extra pieces to size and glued them to the bottom of my headstones using water-activated Gorilla glue and adding pieces of wire fencing or a tomato cage for extra support, this time around we had an old tomato cage we used. 

We then took the tomato cage and cut out an "H". I then pushed the top part of the "H" into the bottom of the headstones all the way to the middle part of the "H" and then I pulled it back out. Next, I put some water-activated Gorilla glue into both the holes I just made and also ran a line of glue connecting the two holes, then I reinserted the "H" into the newly glued holes and set aside to dry.

After they are fully dried, I put the headstones into the ground by pushing the bottom part of the "H" into the ground so that each headstone was standing upright. 

Then I started lightly spraying them with the first coat of gray primer.

I also used two different shades of gray primer and green camo paint to give an uneven color effect. 

After the final coat of primer was dry I went in with my black craft paint and a paint brush and darkened all the carved out areas. 

You can stop here and enjoy your new headstones or you can move on to the next optional step to add a bit more character to your headstones.

Last year while I was touching up the paint on my headstones (1st time needing to do this after like 15yrs!) I decided I wanted to add a little "something" to spruce them up a bit. So I gave some of them a little aged and dirty effect with some brown and green paint (think algae and runny dirt), I also got some moss from the dollar store and glued it on a few using Gorilla glue.

Have fun and let your creativity run wild!!

Check out our video tutorial on DIY Styrofoam Headstones

Thank you for stopping by and checking out our DIY Styrofoam Headstones Tutorial! What did you think about this project? Be sure to let us know in the comments below! 

If you enjoyed this post, we’d be very grateful if you’d help it spread by emailing it to a friend or sharing it on Twitter and/or Facebook. Don't want to lose this? Pin it on Pinterest so you can get back to it later!

Have a great day! 

Other Krazy Deal Daze Post You May Be Interested In: 

· Halloween Haul

· October Shopping Guide 2018

· DIY Halloween Apothecary Tutorial

· Corpsing Dollar Tree Halloween Décor

· DIY Halloween Spell Books

Corpsing Dollar Tree Halloween Décor

Corpsing Dollar Tree Halloween Décor | Spooktacular

This post contains paid affiliate links, please read our Advertising Disclosure Statement.

Corpsing Dollar Tree Halloween Décor

So recently I was at a local Halloween Shop and saw some skulls of various sizes that looked mummified. I immediately picked one up to see it's price and was taken aback… These skulls range in price from about $13 to about $20 depending on their size. As I was looking them over and examining them I thought to myself "you know I could probably make these for much cheaper." And that's how the idea to corpse some Dollar Tree Halloween decorations was born.

Items Needed:

Gift Tissue Paper - Dollar Tree

Craft Paints - Walmart

Titebond waterproof Wood Glue - Walmart

Plastic Skeleton Arms - Dollar Tree

Plastic Skull - Dollar Tree

Various Sized Paint Brushes - Walmart

Paint Tray

Water

Paper Towel

Styrofoam Block (Optional)

Plastic Skeleton Arms

First, we'll start off with the plastic skeleton arms and attaching the ground stake. After attaching the ground stake to the plastic skeleton arm, I took the tissue paper and tore it into strips.  Next, I stuck the stake into the Styrofoam block using the Styrofoam block as a stand for the skeleton arm. 

Next, I mixed my red craft paint with some of the wood glue and start painting the skeleton arm.

Then I took the tissue paper strips and crumpled them in my hands before placing them on the skeleton arm and pressing them into the painted/glued areas.

Then I painted over the tissue paper with wood glue. I repeated those last two steps until the parts of the arm that I wanted to be covered with the tissue paper were covered.

Then I started mixing my other chosen colors with the waterproof wood glue and started painting the tissue paper.

I'm using waterproof wood glue because I plan on using these outside and need them to hole up to the humidity here in Florida. To get the color effect for "rotting, mummified skin" I used burnt umber, flesh tint, dark green, and black. Then I put a final coat of wood glue over the entire tissue paper covered plastic skeleton arm to blend all the colors used and to seal it. Finally, I set it off to the side to dry overnight.

Plastic Skull

First I painted the eye holes and nose hole with my flat black craft paint.

I then used the black craft paint to fill in the crevices in and around the teeth and filled in some of the cracks throughout the skulls.

Then I mixed the burnt amber with a smidge of red and painted the area around the mouth the teeth and areas around the cracks that I had painted black. These areas I will not be adding tissue paper.

Once I was finished painting those areas I took a piece of paper towel and dabbed the paint before it dried to remove the brush strokes. Blotting with the paper towel really gave it an authentic effect. I then rubbed some of the paint of the raised parts of the teeth.

Next, I took torn up bits of tissue paper and crumpled them up. Then after painting on some wood glue I pressed and painted the tissue paper into the glued areas using a glue/paint mixture. 

I repeated those last two steps until the parts of the Skull that I wanted to be covered with the tissue paper were covered. Then I put a final coat of wood glue over the entire skull to seal it. Finally, I set it off to the side to dry overnight.

Check out our video tutorial on Corpsing Dollar Tree Halloween Décor

Thank you for stopping by and checking out our Corpsing Dollar Tree Halloween Décor Tutorial! What did you think about this project? Be sure to let us know in the comments below! 

If you enjoyed this post, we’d be very grateful if you’d help it spread by emailing it to a friend or sharing it on Twitter and/or Facebook. Don't want to lose this? Pin it on Pinterest so you can get back to it later!

Have a great day! 

    

Other Krazy Deal Daze Post You May Be Interested In: 

· Halloween Haul

· October Shopping Guide 2018

· DIY Halloween Apothecary Tutorial

· How to get your FREE PINCHme Subscription Box

· DIY Halloween Spell Books

Dollar Tree Succulent Planter DIY

Dollar Tree Succulent Planter DIY

This post contains paid affiliate links, please read our Advertising Disclosure Statement.

This Dollar Tree DIY was inspired by my daughter and her love of succulent plants. Not including the spray paint which we had left over from a previous project, this DIY craft cost only $8. See how I made it in the video below!

Thank you for stopping by and checking out our DIY Dollar Tree Succulent Planter DIY, we hope you enjoyed! What’s your favorite go-to plant to brighten your décor?  Be sure to let us know in the comments below!

If you enjoyed this post, we’d be very grateful if you’d help it spread by emailing it to a friend or sharing it on Twitter or Facebook. Don't want to lose this? Pin it on Pinterest so you can get back to it later! 

Have a great day!🌞

    

Other Krazy Deal Daze Post You May Be Interested In:

• https://www.krazydealdaze.com/2018/03/diy-furniture-makeover-transforming-old.html
• https://www.krazydealdaze.com/2017/08/diy-beauty-light-ring-tutorial-w-video.html
• https://www.krazydealdaze.com/2017/10/diy-halloween-apothecary-tutorial.html
• https://www.krazydealdaze.com/2017/11/diy-fall-no-sew-decorative-pillowcases.html

DIY Fall Bucket Vase Floral Tutorial

Welcome to the 2017 Falling into Autumn Series

Be sure to watch the Tutorial Video below!

This post contains paid affiliate links, please read our Advertising Disclosure Statement.

It's Autumn here in the Northern Hemisphere and almost Thanksgiving!! So what are you thankful for? We're thankful for family, friends, and slightly cooler weather (Florida Falls can still be a little warm). This is our second Fall and Thanksgiving in this house so, I still have a few "empty" spaces to fill with some Fall goodness!

Our first project in our 2017 Falling into Autumn Series is this beautiful metal bucket vase I made using items from the Dollar Tree, Hobby Lobby and items I already had just laying around. All the Fall florals used in this project I got for 40% off at Hobby Lobby.

You'll Need:Metal Bucket Vase (Dollar Tree)
Floral Form (Dollar Tree)
Contact Paper (Dollar Tree)
Fall Florals (Hobby Lobby)
Hot Glue Gun
Glue Sticks
Scissors
Exacto Knife
Wire Snippers
Printer
Masking Tape
Spray Paint
Something heavy to weigh down the vase

I started by cutting a piece of contact paper from some leftover I had lying around. It needs to be cut big enough to be able to run through your printer. I then used my Microsoft Publishing program to create the word Fall and selected my font. I then flipped the writing to print to the back side of the contact paper.

I then put the contact paper into my printer like you would a piece of paper. Because it was rolled up it didn't want to lay flat, so I used a ruler and carefully held it in place to help the contact paper lay flat till the printer picked it up and started printing.

Now to cut out your word. I used both scissors and an Exacto knife. When you print the words backwards after you cut out your word and peel the backing off when you adhere it to your project it will be legible again.

After you cut out your word, peel off the backing and apply sticky side down to the vase. When using contact paper for this, it's really easy to take it off a re-adhere it to the project as many times as you need to till you get it just right.

Once I got the word placed just right, I grabbed some masking tape to tape off the roped top part of the vase.

Now time to paint! (I still had some left over from last year’s Fall crafts)

After your vase is fully dry you can remove the masking tape and the contact paper. I used my Exacto knife to help gently lift an edge so I could peel it off.

Then I hot glued my weighted object to the inside bottom of my vase (I tore apart an old weighted balloon holder from the dollar tree.)

Then I inserted the floral foam.

Using your wire snippers trim your Fall florals to size.

Insert your Fall florals into your floral foam and repeat till you get your desired look and fullness.

Now to find it a new home in your Fall decor!!